Drills and Drill Bits
Grainger Face Mill MFPN 453000R6T MFPN 300
The Kyocera Face Mill is a high-performance cutter for high-speed machining of aluminum and non-ferrous metals. It has a 1" diameter, 4 flute design with replaceable carbide inserts for a superior finish. Made of heat-treated alloy steel, it offers rigidity and durability. With a maximum speed of 12,000 RPM and feed rates up to 0.004" per tooth, it includes 5 carbide inserts with TiAlN coating for wear resistance. Ideal for face milling, slotting, and side milling in aerospace and automotive industries, this versatile face mill excels in demanding operations.
Grainger End Mill Kyocera EM 1500 1.5000 Dia
The Kyocera 170HN0 is a 1/2" diameter, 4 flute, high speed steel end mill with a 1-1/2" overall length. It has a TiAlN coating for increased hardness and heat resistance. The end mill has a 30 degree helix angle and can be run at speeds up to 325 SFM. It is designed for slotting, profiling, contouring, and facing in both ferrous and non-ferrous materials. The end mill features a center cutting design for plunge cuts.
Grainger Threaded Shank Drill #10 Cobalt
The Grainger 7/16" x 6" Threaded Shank Drill Bit is made of high speed steel and has a black oxide finish for durability. It features a threaded shank that fits power drills and can drill through metal, wood, and plastic. The drill bit has a 118 degree point angle and is designed for general purpose drilling in metal. It can drill 7/16" diameter holes. The overall length is 6". This drill bit is ideal for metalworking applications that require drilling holes in steel, aluminum, cast iron, and other metals.
Grainger End Mill Kyocera MEW 25S20103T 25mm
The Kyocera 170HT9 is a 1/2" diameter, 4 flute, high speed steel end mill with a TiAlN coating. It has a 1-1/2" overall length and a 1/2" shank diameter. The end mill features a 30 degree helix angle and can be run at speeds up to 325 SFM. It is well-suited for slotting, profiling, contouring, and facing in both ferrous and non-ferrous materials. The TiAlN coating provides high hardness, heat resistance, and lubricity. This is a high quality end mill for moderate to heavy duty milling applications.
MSC 20V MAX COMPACT BRSHLS DRILL/DRIVE
20 Volt, 1/2" Chuck, Mid-Handle Cordless Drill 0 to 1,600 RPM, Reversible, 2 Lithium-Ion Batteries Included
Grainger Sq. End Mill Single End Carb 0.0100
The Micro 100 Square End Mill Carbide is a high performance end mill designed for milling a variety of materials including steel, stainless steel, cast iron, aluminum, copper, brass, bronze, plastic and more. This square end mill features four flutes and a TiAlN coating for increased tool life and heat resistance. With a diameter of 1/2", shank diameter of 3/8", and overall length of 2-1/2", this carbide end mill provides excellent performance in light to heavy milling applications. The square shape allows milling of shoulders, slots, angles, and contours. Made in the USA, this high quality end mill is ideal for machine shops.
Grainger Sq. End Mill Single End Carb 1.30mm
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has a 1/2" shank diameter, 1" overall length, and a 1/2" cutting diameter. The end mill has 4 flutes and a right-hand spiral. It is designed for use on steel, stainless steel, cast iron, aluminum, brass, bronze, and plastics. The end mill provides accurate cuts and smooth finishes at speeds up to 2000 SFM. It is made in the USA.
Grainger Sq. End Mill Single End Carb 5/8
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has four flutes and a right-hand spiral. The overall length is 3 inches and the shank diameter is 0.5 inches. This end mill is uncoated and made in the USA. It can be used for a variety of materials including low carbon steel, alloy steel, tool steel, cast iron, stainless steel, aluminum, brass, bronze, and plastics. The square end allows milling of 90 degree shoulders and corners in one pass.
Grainger Sq. End Mill Single End Carb 6.00mm
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has a 1/2" shank diameter, a 1-1/2" overall length, and a 1/2" cutter diameter. The number of flutes is 2. This end mill is uncoated and made in the USA. The primary applications are slotting, side milling, and pocketing in low carbon steels at surface speeds up to 115 SFM when used with rigid setups.
Grainger Cor Rad End Mill 1/8 Carb 0.0100 rad
The Micro 100 Corner Radius End Mill is a carbide end mill with a corner radius of 0.031 inches. It has a 1/4 inch shank diameter and is available in multiple lengths from 1/2 inch to 2 inches. The end mill has 4 flutes and can be run at speeds up to 12,000 RPM. It is designed for general purpose milling in steel, stainless steel, cast iron, aluminum and other non-ferrous metals. The end mill features TiAlN coating for increased tool life and lubricity. It produces a smooth corner radius on parts.
Grainger Cor Rad End Mill 1/8 Carb 0.0100 rad
The Micro 100 Corner Radius End Mill is a carbide end mill with a corner radius of 0.031 inches. It has a 1/4 inch shank diameter and is available in multiple lengths from 1/2 inch to 2 inches. The end mill has 4 flutes and can be run at speeds up to 12,000 RPM with feed rates from 0.001 to 0.004 IPR. It is designed for general purpose milling in steel, stainless steel, cast iron, aluminum and other non-ferrous metals. The end mill features a TiAlN coating for increased tool life and heat resistance. It produces a smooth corner radius on parts.
Grainger Sq. End Mill Single End Carb 1/32
The Grainger 14M342 is a 3M Scotch-Brite General Purpose Hand Pad that features an open web construction and is made of nylon and synthetic fibers. This 8" x 4" hand pad has a medium duty scrubbing level and is ideal for cleaning pots, pans, dishes, flatware, and other kitchen items. It effectively removes dried or burnt on foods without scratching. The pad is latex-free, disposable, and can be used wet or dry. Overall, the 3M Scotch-Brite 14M342 General Purpose Hand Pad is a versatile scrubbing tool for various cleaning tasks.
Grainger Cor Rad End Mill 1/16 Carb 0.0050 rad
The Micro 100 Corner Radius End Mill is a carbide end mill with a corner radius of 0.031 inches. It has a 1/4 inch shank diameter and is available in a length of 2 inches. The end mill has a TiAlN coating and 4 flutes. It is designed for high feed milling in steel, stainless steel, and cast iron. The end mill provides good chip evacuation and can mill small radii.